Site Navigation
_____________________
Hot Pressure Washers
Cold
Pressure Washers
Trailer mounted PW
Cabinet Washers
N-Gas or LP Fired
Parts Washers
Car Wash
Space
Heaters
Reconditioned Washers
Parts &
Accessories
Chemicals
About Us
Mail Form
Contact Us
Staff
Allied Dealers
To Become
our Dealer
or
Starting
a New Business
CLICK HERE
GOV GSA MILITARY |
| |
|
Diesel Drive Cold Pressure Washer 5_5500 |
|

Click
here for larger image |
|
SPECIFICATIONS:
Operating pressure:
Water Volume 4-6GPM, PSI is 3000-6000, HP
18-36, downstream chemical, nozzle0 and 15
degree, 36" trigger gun and wand with 3/8"ends,
controls toggle switch, chemical metering-
downstream, water pump 3-5 ceramic plunger, oil
bath, tank, dura gloss paint.
Made and Tested in the USA.
|
|
Diesel Drive Cold Pressure Washer 6_6000 |
|

Click
here for larger image |
|
SPECIFICATIONS:
Operating pressure: Water volume 4-6, PSI
3000-6000, HP 18-36,HP 18-36, downstream
chemical, nozzle0 and 15 degree, 36" trigger gun
and wand with 3/8"ends, controls toggle switch,
chemical metering- downstream, water pump 3-5
ceramic plunger, oil bath, tank, size: length
58", width 32", height 48", weight 450-600 lbs.
Made and Tested in the USA.
|
|
Portable
Chemical Application Station |

Click
here for larger image |
|
SPECIFICATIONS:
Chemical
tank, hose reel with 200' hose capacity, male
quick connector attached on hose,
female quick connector, ball valves, check
valve, gauge valve, pressure gauge, hand brake
kit, stainless
steel pipe, dura gloss paint, pneumatic tires. |
|
Skid Mounted 120V - 2400 Watt Generator Pressure
Washer |
|

Click here for larger image
|
|
SPECIFICATIONS:
Operating pressure: 1000-5000 PSI, water volume
2-20 GPM, burner gun type atomizing, BTU input
180,000 -1.000,000, type of fuel of fuel
kerosene, or #1 heating oil, water tip size depends on machine volume, ignition
10,000V igniter, generator 120V or 12V, controls: switches, chemical metering, flow
switch and adjustable thermostat, pump drive is
direct, belt, or gear, pump engine: HP depends
on machine volume, pump engine gas or
diesel, coil size 1/2" SCH, 80 ASME pipe
helical wound, pressure hose 100 R1 or 100
R2 with
3/8" one swivel and one solid, water pump
ceramic plunger, oil bath, pressure gun is plastic handle
trigger gun, pressure wand 36" long plated with
insulator, fuel capacity 7-20 gallons, chemical low pressure (down stream), dura gloss paint, quick
couple nozzles, safety relief valve, hi-limit
shut down, tank 200-300 gallons, hose reel, size
42"L, 26"W 48"H.
Optional features: sand blaster,
dual lance, float tank,
rotary brush, draft diverter, high pressure
chemical, high pressure/steam combo, double ss wrap,
high pressure strainer, foamer, hour meter, sewer
nozzle.
Skid Mounted
Hot Water
Pressure Washers
are available in models:
1000-3, 1500-2, 1500-5, 1800-4, 2000-3, 2000-5,
2300-4, 2500-3, 3000-5, 3200-4.5, 3000-5,
3000-6,
4000-5, 4300-4, 4500-3,4000-5, 4200-4.5, 4000-5,
4000-6, 5000-5, 5300-4, 5500-3, 5000-5,5200-4.5,5000-5,
5000-6, 6000-5, 6300-4, 6500-3, 6000-5,6 200-4.5,
6000-5,
6000-6, as well as any PSI and GPM machine can be produced
through a SPECIAL QUOTATION.
|
|
All Stainless Steel Oil Fired Pressure Washer |
|

Click here for larger
image
|
|
SPECIFICATIONS:
Operating pressure: 3200 PSI, 4.5 GPM,
Burner - gun type, pressure atomizing, BTU -
455,000, type of fuel - kerosene or #1 home
heating oil, fuel consumption 3.50 gallons per
hour, fuel nozzle size - 3.25-90B, 1507 water
tip size, ignition - constant 10,000 volt
transformer, controls - switch, chemical
metering flow switch and adj, temperature limit,
pump motor - 8.5 HP, 60HZ, 230V, 1725 RPM, water
pump - 3 ceramic pistons, oil bath type, burner
motor - 1/5HP 230 VAC, 3450 RPM, pump drive -
2industrial belts, coil size - 1/2"SCH 80 pipe,
helical wound, pressure hose - 3/8"IDx50', RL
with 3/8"ends, pressure wand - 36" plated with
insulator, pressure gun - plastic handle trigger
gun, fuel capacity - 11.8 gallons (aprox.)
chemical - low pressure down stream, wheels 13x6
pneumatic with inner tubes 3/4" axle hub, size
65"L, 35" H, 32"W.
Made and Tested in the USA. |
|