GED  Portable 12V Hot Pressure Washer

click here for larger image

SPECIFICATIONS:
Operating pressure: 1000-4000 PSI, water volume 3 - 5.5 gallons, burner gun type - pressure atomizing, BTU input depends on machine volume, type of fuel kerosene or #1 heating oil, fuel consumption depends on machine volume, fuel nozzle size depends on machine volume, water tip size depends on machine volume, ignition 10,000 volt constant igniter, controls switches, chemical metering, flow switch & adjustable temp limit, relief valve, pump motor 13-24 HP briggs & stratton, vanguard, electric start, battery 12 volt DC, water pump 3 ceramic plunger, oil bath type, burner motor 12 volt, DC, 3400RPM, pump drive direct drive and gear drive, coil size 1/2"SCH, 80 pipe, helical wound, pressure hose 3/8"IDx50' R1with 3/8"ends, pressure gun plastic handle trigger gun, pressure wand 36" galvanized with insulator, fuel capacity 7.5 gallons, stainless steel and bras unloader valve, temperature rise F/150° or C/66° above ambient, maximum 200° F, Wand holder, solid steel axle, pressure and high limit safety controls, low pressure detergent injection, wheels 13x6 pneumatic with inner tubes 3/4" axle hub, size 66"L 48"H 28"W.
GED Portable 12V Hot Pressure Washers are available in models:
1500-5, 2300-4, 3000-4, 2000-5, 3000-5,  3200-4.5, as well as  any PSI and GPM machine can be produced through a SPECIAL QUOTATION.   
 

GED  Portable 120V Hot Pressure Washer

SPECIFICATIONS:
Operating pressure: 1000-5000 PSI, water volume 3 - 5.5 gallons, burner gun type - pressure atomizing, BTU input depends on machine volume, type of fuel kerosene or #1 heating oil, fuel consumption depends on machine volume, generator 24 watt, fuel nozzle size depends on machine volume, water tip size depends on machine volume, ignition 10,000 volt constant igniter, controls switches, chemical metering, flow switch & adjustable temp limit, relief valve, pump motor 13-35 HP briggs & stratton, vanguard, electric start, battery 12 volt DC, water pump 3 ceramic plunger, oil bath type, burner motor 12 volt, DC, 3400RPM, pump drive direct drive and gear drive, coil size 1/2"SCH, 80 pipe, helical wound, pressure hose 3/8"IDx50' R1with 3/8"ends, pressure gun plastic handle trigger gun, pressure wand 36" galvanized with insulator, fuel capacity 7.5 gallons, stainless steel and bras unloader valve, temperature rise F/150° or C/66° above ambient, maximum 200° F, Wand holder, solid steel axle, pressure and high limit safety controls, low pressure detergent injection, pneumatic tires 13.00x6 with inner tubes 3/4"axle hub, size 58"L 48"H 29"W.
EGED_Portable 12V Hot Pressure Washers are available in models:
1700-3.5JGED_PORT,E2000-3GED_PORT,E2000-4GED_PORT,E23004GED_PORT, E25003.2GED_PORT,E25005GED_PORT,E30003.5GED_PORT,E30004.5GED_PORT, E3000-5GED_PORT, EL2000-3.5GED_PORT, EL300-5GED_PORT.

GED- SKID 120V Hot Pressure Washers

click here for larger image

SPECIFICATIONS:
Operating pressure: 3000 PSI, water volume 5GPM, burner gun type- pressure atomizing, BTU input 455,000, type of fuel kerosene or #1 heating oil, fuel consumption 3.25 gallons per hour, fuel nozzle size 3.25-90B, water tip size 0005.5,1505.5 tips, ignition 10,000 bolt constant igniter, controls switches, chemical metering- flow switch and adjustable temp. limit - relief valve, pump motor 18HP, battery  12 volt DC, water pump 3 ceramic plunger, oil bath type, generator 2400 watt, burner  motor 1/5 HP, 120V, 60HZ, 1 PH, 3450 RPM, pump drive 2 industrial belts, coil size 1/2"SCH, 80 pipe, helical wound, pressure hose 3/8" ID x 50' ends, pressure gun plastic trigger gun, pressure wand 36" galvanized with insulator, fuel capacity 7.5 gallons, size 41" long, 48"high, 22" wide.
GED_SKID 12V Hot Pressure Washers are available in models:
E1700-3.5JGED, E2000-3GED, E2000-4GED, E2300-4GED, E2500-3.2GED, E2500-5GED, E3000-3.5 GED, E-3000-4.5GED, E-5GED, EL2000-3.5GED, EL300-5GED.

GED- SKID 120V Hot Pressure Washers With Tank

click here for larger image

SPECIFICATIONS:
Operating pressure: 1000-5000 PSI, water volume 5GPM, pump engine - gas or diesel, battery 12 volt, burner gun type atomizing, BTU input 455,000,type of fuel kerosene, home hgt oil, water pump ceramic plunger, oil baht, fuel consumption 3.25 GPH, fuel nozzle size3,25-90B, burner motor 120V, generator 120V ac, 2400 watt, pump drive direct gear or belt, coil size 1/2"SCH, 80 pipe, pressure hose 100 R1 or 100 R2, pressure trigger gun, pressure wand 36" with insulator, fuel capacity 7-20 gallons, water type size pressure sized, 10,000 volt igniter, tank 200-300 gallons.
 

GED- SKID 120V Hot Pressure Washers 4000 PSI at 5 GPM Custom made

click here for larger image

Specifications for GED_SKID  120 V 4000 PSI at 5 GPM are same as specifications for 120 V hot pressure washer with tank, except there is not tank.

 Oil Fired Stationary Heated Pressure Washer

click here for larger image

SPECIFICATIONS:
Operating pressure: 1000-5000PSI, water volume 3-5.5 gallons, burner gun type pressure atomizing, BTU input 350,000-850,000,type of fuel kerosene #1, water type size 1505,ignition electric ignition, controls- switches chemical metering, flow switch and adjustable temperature limit, pump motor HP depends on machine volume, water pump is 3 ceramic plunger, oil bath type, pump drive 2 industrial belts, coil size 1/2" SCH, 80 pipe, helical wound, pressure hose 3/8" ID x 50', RI 1 with 3/8" ends, pressure gun plastic handle trigger gun, pressure wand 36" long plated with insulator, chemical low pressure (down stream), dura gloss paint, UL approved control box, ceramic plunger  oil/bath pumps, quick couple nozzle, safety relief valve, size  42" L, 48"H, 26" W.
Optional features: high pressure chemical, high pressure/steam combo, double SS wrap, high pressure strainer, rotary tips, sand blaster, hose reel, float tank, dual lance, rotary brush, soap nozzle, sewer nozzles, hour meter, foamet.
Oil Fired Stationary Heated Pressure Washer is available in models:
1000-3S, 1500-2S, 1500-5S, 1800-4S, 2000-3S, 2300-4S, 2500-3S, 2000-5S, 3000-4S, 3200-4.5, 3000-5S, 3000-6S and more.

Portable Steam  Cleaner Model 180

click here for larger image

SPECIFICATIONS:
Operating pressure 250 PSI, water volume 2 GPM, burner gun type, pressure atomizing wayne eha, BTU 282,000, combustion chamber stainless steel lined, type of fuel kerosene or #1 home heating oil, fuel consumption 3.25 GPH, fuel nozzle size 3.25-80B, water tip size #38, ignition constant 10,000 volt transformer, controls switches, high temp. limit and chemical, pump motor 2HP, 110V, 60HZ, 1PH, 1725 RPM, water pump piston pump, burner motor 1/5 HP, 110V, 60HZ, 1PH, 3450 RPM, pump drive direct drive, dura gloss paint, coil size 1/2" SCH 80 pipe, helical wound, pressure hose 3/8" ID x 50' combustion with 3/8" ends, gun type 31" galvanized with insulator and plastic handle gun, fuel capacity 10 gallons (approximately), size 37" L, 46" H, 271/2 W, pneumatic tires 13.00x6 with inner tubes 3/4"axle hub, size 58"L 48"H 29"W.
Optional features: H/P steam combo, H/P steam injection, tricycle steering, float tank, sewer nozzles, 5 gallons soap holder , four wheel baby buggy.
Portable steam cleaners are also available in models: E-180 which is Gas Engine Drive, 303 and 304. All models are available with a combination kit to make the unit a hot high pressure washer.

SPECIFICATION TABULATION FOR STEAM CLEANER